MiPro ACT-312-ACT-30T Dual Channel Wireless System for 5ND

MiPro Dual Channel Wireless System

MIPRO:ACT-312/ACT-30T*2 - 5ND

Regular price $899.00
/
Shipping calculated at checkout.

The MiPro Dual Channel Wireless System is an innovative wireless microphone system for audio professionals, performers, broadcasters, and everyone who wants confidence in their audio system. 

ACT-312 Dual Channel Receiver
  • EIA standard 1/2U metal receiver.
  • Receiver provides bias for booster where MIPRO antenna systems can be added for extended
  • receiving range and stability.
  • Backlit LCD displays group, channel, frequency, RF level, antenna selection, AF level, battery level
  • indicator, interference warning indicator, and panel lock indicator.
  • A lit green light indicates a working mode when receiver detects an incoming signal or buttons
  • touched. Light dims automatically when receiver is idle for about 10 seconds.
  • Balanced XLR / unbalanced 1/4 " audio output jack, output level switch and DC input are on the rear
  • panel. One mixed-output switch is available for dual-channel receivers.
  • High efficiency and low spurious PLL circuitry with Auto Scan functioin. Each receiver is presets with
  • 11 groups, Groups 1~6, 7~10 have 8 &16 compatible channels respectively. Up to 8 channels in group 11 can be saved and recalled within 961 user-defined frequencies. A total of 112 preset channels per band.
  • World’s first ACTTM function provides precise and rapid frequency sync to the transmitters.
  • Advanced diversity technology for optimum reception range and reduces signal dropouts and the
  • “PiloTone & NoiseLock” dual-squelch circuits prevent noise interference.
  • Adjustable ‘SQ’ for higher sensitivity to increase receiving distance and lower sensitivity to reduce
  • interference.
  • Industry’s only RF interference warning indicator for ideal SQ level adjustment.
  • DC input socket accepts 12~15V power supply.
ACT-30T Transmitter
  • The ACT-30T works with all MiPro receivers on frequency 5ND.
  • ACT-30T transmitter operates on 20 hour battery life on 2 AA batteries.
  • LCD displays working band-code, group, channel, frequency, AF input gain, RF output power, mute & lock status, battery status and error codes.
  • Pilotone squelch for interference-free operation.
  • Silent on/off switch.
  • Built-in transmitter gain adjustment.
  • ACT™ syncs the transmitter and receiver frequency automatically.
  • The durable Switchcraft connector locks in tight and will not corrode
  • like the Hirose connector used on Audio Technica and other mic systems.
  • Headset Mic not included. Add your own or choose one of ours here:
  • Headset Microphones
  • EIA standard 1/2U metal receiver.
  • Backlit LCD displays group, channel, frequency, RF level, antenna selection, AF level, battery level indicator, interference warning indicator, and panel lock indicator.
  • Advanced diversity technology for optimum reception range and reduces signal dropouts and the Industry's only RF interference warning indicator for ideal SQ level adjustment.
  • Housing Material: Rugged ABS Plastic
  • Preset Channels:
  • 112 preset channels.
  • Group 1-6: 8 compatible channels in each group.
  • Group 7-10: 16 compatible channels in each group.
  • Group 11: Up to 8 channels can be saved & recalled.
  • 961 user-defined frequencies in group 11.
  • Oscillation Mode: PLL Synthesized
  • Carrier Frequency Range: UHF 620~644MHz
  • Bandwidth: 24MHz
  • RF Output Power: 10mW / 50mW (switchable)
  • Spurious Emissions: <-55dBc
  • Max. Deviation Range: ±68KHz, with compandor and level limiting.
  • Approvals: FCC, Industry Canada
  • Maximum Input Level: 0dBV
  • Input Connector: Switchcraft TA4F Mini-XLR
  • Batteries: 2 AA
  • Battery life: ~20 hours